焊接程序:版本升級/刷屏方法(中英)

(如果您已經獲得了帶有程序的SD卡,可直接跳到最后2.3進行刷機操作)


一.刷程序前的準備


1.1.內存卡(容量在16G以下,過大將會導致刷程序異常)

(內存卡的選擇請與售后提前溝通,不同的版本區分SDHC大卡或小卡

1.2.專用讀卡器(USB轉SD的都可以)

(If you already have an SD card with the program, you can skip to the last 2.3 for swiping.)


1. Preparation before brushing the program


1.1. Memory card (capacity below 16G, too large will lead to abnormal brushing)


(The selection of memory card please communicate with the after-sales in advance, different versions of the SDHC card or small card)


1.2. Dedicated card reader (USB to SD can be used)



二.程序的寫入


2.1通過讀卡器連接到電腦后,右鍵此設備進行格式化,請注意,在格式化選擇中,使用分配單元大小為4096字節

Ii. Program writing


2.1 After connecting to the computer through the card reader, right-click this device to format, please note that in the format selection, the size of the allocation unit used is 4096 bytes







2.2把解壓后的整個DWIN_SET文件夾放入設備中(相關程序包請向我司詢問)

2.2 Put the entire DWIN_SET folder after decompression into the device (please ask our company for related program packages)


2.3 把帶有程序的SD卡在系統斷電的狀態下插入屏幕的卡槽

2.4 上電等待自動刷包,當第一行尾部出現END,再次斷電,拔掉SD卡

2.5 上電刷機完成

2.3 Insert the SD card with the program into the card slot of the screen when the system is powered off


2.4 Power on. Wait for automatic brushing. When the END of the first row appears, power off again and remove the SD card


2.5 Powering on and brushing the machine is complete