SUP20S/T聚焦鏡片的安裝(中英)

注意:

be careful:


1.更換時請注意現場環境,建議使用密封膠帶防護更換

Please pay attention to the on-site environment during replacement, and it is recommended to use sealing tape for protection and replacement


2.聚焦凸面朝下(即安裝后朝向保護鏡方向)

2. Focusing convex face downward (i.e., facing the direction of the protective mirror after installation)


3.聚焦鏡密封圈為:15*21*2.7

3. Focusing mirror sealing ring: 15 * 21 * 2.7


4.默認的聚焦鏡規格為:(焊接)D20*4.5 F150   (三合一清洗)D20*3.5 F400

4. The default focus lens specification is: (welding) D20 * 4.5 F150 (three-in-one cleaning) D20 * 3.5 F400



(圖示中使用的為F200/F400鏡片,因此需要一個墊圈,常規型號不需要)

(The F200/F400 lens used in the illustration requires a gasket, which is not required for conventional models.)