銳科C系與控制盒的控制接線(中英)

注意:

1.請確保文中的激光器圖示與您使用的激光器為同一型號

2.如激光器廠家信號更改,則下列接線失效,請按照廠家提供的定義接線

Attention:


1. Please ensure that the laser icon in the article is the same model as the laser you are using


2. If the laser manufacturer's signal changes, the following wiring fails. Please connect the wiring according to the manufacturer's definition




銳科小體積RFL-C系圖示

Illustration of the small volume RFL-C series of Rayco


激光器信號接口CTRL-INTERFACE定義(DB25)

Laser Signal Interface CTRL-INTERFACE Definition (DB25)


激光器信號接口SERVRCE定義(DB9)

Laser Signal Interface SERVRCE Definition (DB9)





根據以上定義,接線方式:


1.首先短接激光器信號接口SERVRCE定義(DB9)的6和7

2.MODULATION插口的電纜線線芯(MOD+調制信號)接控制盒的信號接口三的7號腳

3.MODULATION插口的外部金屬網(MOD-調制信號)接控制盒的信號接口三的6號腳


4.DB25的22腳(外部模擬量給定0-10V+)接控制盒的信號接口三的5號腳

5.DB25的25腳(22.23的參考地)接控制盒的信號接口三的4號腳


6.DB25的6腳(激光使能)接控制盒的信號接口三的2號腳

7.DB25的9腳(6.7.8.20.24的返回端)接控制盒的信號接口三的4號腳


8.DB25的7腳(外部AD模式)接控制盒的信號接口三的3號腳

9.DB25的20號腳(PIN8.PIN24的電源)接控制盒的信號接口三的3號腳

According to the above definition, the wiring mode:




1. First short-circuit 6 and 7 of the laser signal interface SERVRCE definition (DB9)


2.MODULATION jack of the cable wire core (MOD+ modulation signal) is connected to pin 7 of signal interface 3 of the control box


3. The external metal mesh (MOd-modulated signal) of the MODULATION jack is connected to pin 6 of signal interface 3 of the control box




4. Connect pin 22 of DB25 (external analog 0-10V+) to pin 5 of signal interface 3 of the control box


5. Connect pin 25 of the DB25 (reference ground of 22.23) to pin 4 of signal port 3 of the control box




6. Connect pin 6 (laser enabled) of the DB25 to pin 2 of signal port 3 of the control box


7. Connect pin 9 of the DB25 (return end of 6.7.8.20.24) to pin 4 of signal port 3 of the control box




8. Connect pin 7 of the DB25 (in external AD mode) to pin 3 of signal port 3 on the control box


9. Connect pin 20 of the DB25 (power supply of PIN8.PIN24) to pin 3 of signal port 3 of the control box